 |
Witch
Wilga Wing Span: 72" Weight: 6.0 + lbs. Sold with kite! |
|
Included with Kit: Laser cut coroplast body, arms, head, and legs. Laser cut lite ply. Fully illustrated step by step imanual, full hardware kit (Landing gear, screws, bolts, nuts, fittings, etc...) |
||
Required
to Complete: 3-4 channel radio controller, engine (40-61
two stroke or .45-.72 four stroke), wheels & collars, pushrods,
motor mount, hobby glues/epoxy, and basic hobby tools. |
||
Building: Witch Wilga is easy to build, even for a beginner.
Check our online manuals to get an idea of how simple she is to
assemble. The design is straight forward and only requires simple
hobby tools and glues. A complete fully illustrated instruction
manual guides you step by step through the building process. The
sail (wing) is all sewn and ready to fly, and the body, arms, legs
and head are laser cut and ready for finishing and final assembly.
The kit can be built and ready to fly in less time than many ARF's!
|
||
|
Flight Performance:
Witch Wilga is hand launched and takes to the sky easily. With the
huge wing area, she will float and come to a virtual stop in mid
air. Sky can do high speed dives and even loops. Since Witch Wilga
is such a floater, anyone can easily fly her with just rudder and
elevator controls. Landings are also easy, just remember that throttle
is needed as the elevator has very little effect at low speeds..
She comes down slow and our landing gear will let you touch down,
and protect your engine and prop. |
||
Conclusions: Witch Wilga is a sure bet during Halloween
or any other Fun Fly. She incredibly easy to assemble and fly. Watch
as people are amazed at how steady she is in the air. One pilot
even got a ticket for obstructing traffic when cars on the highway
stopped in amazement just to watch Witch Wilga flying around. |
||