  |
Sky
Cutter Wing Span: 24.5" Weight: 5.5 - 6.0 lbs. Sold with or without covering material |
|
Included with Kit: CNC cut foam, laser cut balsa and lite-ply, full size plans, step by step photo illustrated manual, landing gear, screws, bolts, nuts, fittings, control horns, and nose gear. |
||
Required
to Complete: 4 channel radio controller (with elevon or
"V" tail mixing), engine (40-61 two stroke or .45-.72 four stroke),
fuel tank, pushrods, wheels, prop, covering material, glues, and
basic hobby tools. |
||
Building: While the Sky Cutter may look a little bit
different, the construction techniques used are the same as most
other planes. The average modeler will have no problem. The
instruction manual details the whole build process step by step.
To view our online manual, click here. An average modeler
should have no problem assembling the Sky Cutter. |
||
Flight
Performance: Take offs are a breeze as the Sky Cutter
takes to the air with ease. Simply apply power and pull up
slightly on the controllers once speed has built up. High
speed or slow, the Sky Cutter can fly at any speed and still retain
a constant and steady flight path. Landings require a little
finesse as the Sky Cutter will come in at a high alpha angle.
With a combination of power and elevator, it will touch down softly. |
||
Conclusions: The Sky Cutter is fun and easy to build.
With top quality laser cut balsa, plastic and plywood; beautiful
CNC cut foam cores and parts, it is the ultimate high tech kit!
All in all you can't find a plane that gets you more attention,
is as fun to fly, and rare as this one. |
||